How will it look if your faucet has a hole that can be seen or if it is not being used? I don’t think it will look nice. This is where you have to think of covering that hole in your faucet. But, the question is how? Well, you can use a deck plate to cover the unusable hole in your sink, and it will make your faucet look nice.
Yet, if it’s your first time and doesn’t know well what is a faucet deck plate, then I’m right here to explain the deck plate in detail. I will share all the necessary things you must know if you want to use a deck plate in your faucet sink. So, let’s begin.
A deck plate is also called a base plate for covering extra or additional holes. You can fix a single-hole faucet on countertops or even in the 3 holes sinks using a deck plate. It means you can cover 3 holes at a time while installing a single-hole faucet. And you will be able to fix the faucet mount to the countertop directly with the help of a deck plate.
The main purpose of a deck plate is to wrap the faucet holes that you no longer need to use. Usually, a deck plate performs no other functions than covering the unusable sinkhole. So, it will be your choice whether or not you’ll use a deck plate for your sink.
But, there is an absolute necessity of using a deck plate while you focus on water leakage at your sink faucet or shower valves. The deck plate closes the small gap if there’s any, and also prevents access of insects to the faucet underneath. Therefore, no water leakage will happen in your faucet.
While you fix a deck plate, it will fix at the base of your faucet. It will nicely cover all your unusable holes and allow you to get an excellent finish after you install the faucet. Deck plates come in various shapes to choose them according to the design of your faucet and can meet any installation type. A handy deck plate is installable in a pre-drilled faucet as well.
All you need to do is cover all the existing faucet holes with the deck plate you’ve bought. Some of the faucets come with matching deck plates. These deck plates get a natural look and enhance the elegance of the faucet. But, if you don’t get any matching deck plates, you can buy them separately, which will cost you around 20 dollars maximum.
There are also several options as alternatives to the deck plate. And these alternative ways will help you when you don’t want to use a deck plate. If you don’t want to use any deck plate for your faucet, you can use copper or steel wool.
Steel wool and copper wool are the most useful materials to fill the holes under the sink around pipes. Again, to get the best outcome, you can use silicon chalk. It will also allow you to cover the additional holes in a faucet. Here, you’re completely free to make your choice.
You can easily install the deck plate following the given steps below. Let’s see how:
- Turn off the water and valves and open the tap to remove all the remaining water.
- Lose the faucet to supply line nuts, and to do this job, you can use the Ridgid EZ change tool. It will make your way faster and easier (Use a plier or wrench if you don’t have that EZ tool)
- Now, you have to remove the supply nuts and the old faucet if you have any.
- In the meantime, if you get any middle mounting holes, you’ve to drill out them.
- Now put and snap the deck plate gasket onto the deck plate.
- It’s now time to place your deck plate on the right mounting surface.
- Install your faucet in the hole of the sink now.
- This is how you can easily install a deck plate!
A faucet deck plate is essential if you don’t want to see any additional holes around your faucet in the sink. So, to fill the extra holes in your sink, you must use a deck plate. And it will increase the beauty of your sink and kitchen interior afterward.
However, we’ve provided all the necessary information about what is a faucet deck plate, the purpose of a deck plate, how it works, and also the installation process. Hopefully, you’ll be well guided through this article.