Touchless faucets are also known as sensor-operated faucets. It is widely used in homes and offices. By operating the sensors, you can automatically turn on and off these faucets. This touchless kitchen faucet is water over time.
The touchless faucets generally have a pair of AAA batteries that run the motion sensor. These batteries can keep you going for a year or two. After that the user must replace the batteries with a set of new ones.
Removing the spout from the body requires the right direction and guidance. Now we are going to share step by step guide of replacing batteries. Let’s look at the steps properly with detailed instructions.
Necessary Things To Replace The Battery
It is not so easy task to remove the battery from the touchless faucet and replace it with a new pair of batteries. You always need to be careful when you will do this job.
For replacing the battery, the necessary things are as required
How to Replace The Battery?
Replacing the batteries in a touchless faucet can be a tricky job if you can’t do it properly. The user should follow all the steps properly. Replacing the batteries of touchless faucet requires the following steps:
It is essential to cover the drain in the sink. The primary purpose of the washrag is covering. Thus you will not lose your screws down the drain.
Sometimes you will not find spare screws in local stores or super shops. this is a big hindrance to the first step. After covering the sink properly, the user should turn off the water supply.
In the faucets, some screws secure the temperature lever. It is usually found on the right side of the faucet. Removal of the screw is the main task of this step. The Phillips screwdriver is useful to remove the screw. It is the most proper tool for the removal process.
After finishing the removal, the placement of a spring washer between the screw and the body will appear. In the next step, the user must place, screw, and finally lever it in a safe place. The user must pay proper attention throughout the process.
In step 3, the main task will be lifting the spout. It is known that the spout is one of the essential parts of the touchless faucets. In the process of the removal of the old battery with a new one, the user must lift the spout. There are some screws placed on the back of the faucet.
The primary purpose of the screws is to secure the spout of the faucet to the body. Locating it is very important because there are many screws present on the backside of the faucet. After successfully finding, the user must remove it carefully. Then the user has to lift off the spout from the body of the faucet. With the removal of the spout, the user can jump to step 4.
The battery case is usually found in the boy of the faucet. The main task in step 4 is to find that battery case. It is visible and easy to find. After finding the battery case, the user will see a cover in the case. The cover has a ” – ” and ” + ” stamp on the top. It denotes a negative and positive sign. The battery case needs removing.
Using the Torx screwdriver is essential to remove the battery case. It is worth mentioning that the screws secure the battery case. And the cover secures the battery of the faucet. After successfully removing the screws, the user must lift the lid. The battery will be visible lying. The user needs to remove it.
In step 4, the user removed the battery case. It has already been mentioned that most of the touchless faucets have two AAA alkaline batteries. The user must place the new batteries into the battery case.
You should do it in such a way where the negative side is pointing up on the left side of the battery. Moreover, you have to make sure that the positive side is pointing up on the battery to the right side.
After you have installed new batteries in step 5 successfully, you need to remove the battery case in step 4. You should put it back again on the battery and you must place it properly and secure with screws. After positioning, the spout of the faucet needs to be slide over the faucet body. And then, the user must secure it with the retaining screws.
The user must place the temperature lever on the side of the sink faucet. The temperature lever controls the temperature of the water. So it is essential to set it to a right temperature.
After positioning, slide the spring washer over the threads of the securing screw. After that, the user must thread the screws into the lever and faucet. Turning on water supply and removing the washrag from the sink is the next thing that the user should do. The faucet is ready to use, but waiting for two minutes is advisable.
Let's Watch the Video review:
It is easy to install new batteries in touchless faucets if proper instruction and guidance are followed. If something goes wrong despite following all the instructions accordingly and adequately, consulting with a professional is wise.
It will prevent any severe damage or malfunction of the faucet. They will fix it, and the user will get to see the steps of installation more accurately.